go to: ACCESSORIES
EXTRA EMPTY CASES
PARTS DIAGRAM
BACK TO CARPET TOOLS
Nos. 499 and 500 Stretchers

The Crain Power Stretcher has the features that you would expect in a more expensive power stretcher. Comes complete with adjustable locking power head, Auto-Lok tube, 3 extension tube sections, 1 transfer tube section, folding tail block, and your choice of cases. Adjusts from 37" to 23 ft. and can be lengthened by adding additional extension tubes (No. 502). The No. 500 has an adjusting knob on the top of the power unit with a visual depth setting gauge. Just set the dial to the desired pin depth and you're ready to stretch.
ALL NEW CASES FOR NOS. 499 & 500 ONLY!
Cases available 10/11/2004
STRETCHER ACCESSORIES
up or down
No. 501 Auto-Lok Tube
Fast adjustment to the length of your poles.
Just push back to extend.
Push buttons and pull back to shorten.
No. 502 Extension Tube
Made of steel
Opens up to 56" in length (36" closed)
No. 516 Aluminum Tube
Made of aluminum
Opens up to 56" in length (36" closed)
No. 517 Aluminum Tube
Made of aluminum
Opens up to 105" in length (60" closed)
No. 500Z Cotton Grip Head
For use with stretcher Nos. 499 & 500
Recommended for berbers and low level commercial carpets
1500-23 corner 1500-23 post
No. 1500-23 Folding Tail Block
Spans 20" flat.
Folds for use on corners and posts.
Wheels roll down the wall fast.
Works with all stretchers with standard size poles.
EMPTY CASES SOLD SEPARATELY!
up down
No. 503 Stretcher Carrying Case
Holds:
• Driving head
• 3 extension tubes
• Auto-lok Tube
• Transfer tube
• Folding tail block
OR
• up to six extension tubes
No. 498E Empty Tube Case
Holds:
• 3 extension tubes
• Auto-lok Tube
COMBINATIONS SOLD SEPARATELY:
No. 497 Case wtih Driving Head
Consists of:
• No. 503 Case with Driving Head
• Transfer Tube
• Folding Tail Block

No. 498 Case w/ Tubes & Auto-Lok
Consists of:
• No. 498E Case w/ 3 Extensions Tubes & Auto-Lok tube

No. 500 Single Case Stretcher
Consists of:
• Stretcher with No. 503 Case with Driving Head
• 3 No. 502 Extension Tubes
• Folding Tail Block and Transfer Tube
• Does not come with Auto-Lok Tube ( Comes with 1-50)
PARTS DIAGRAM
up down
499 & 500 Stretcher parts drawing
NO. 499 & 500 POWER STRETCHER
Order No. Description
1499-31 Pin Plate Fasteners Only (7)
1500-1 Handle
1500-2 Head, Tube & Adjusting Knob Assy.
1500-3 Thruster Tube w/Studs
1500-4 Ratchet and Thruster Assembly
1500-5 Nylon Bearing Set
1500-6 Dog
1500-7 Lock Spring
1500-8 Lock Button w/Fasteners (3)
1500-9 Dog Pin w/Fasteners (4)
1500-10 Ratchet Pin w/Fasteners (4)
1500-11 Handle Pin w/Fasteners (4)
1500-12 Saddle Pin w/Fasteners (4)
1500-13** Saddle Fasteners Only (4)
1500-14 Lifting Handle w/Fasteners (2)
1500-15 Tail Block Right Half
1500-16 Tail Block Left Half
1500-17 Tail Block Pivot Tube
1500-18 Tail Block Lock Pin
1500-19 Tail Block Bushing
1500-20 Tail Block Cap Screw
1500-21* Tail Block Wheel Fasteners (2)
1500-22 Brass Washer
1500-23 Folding Tail Block Complete
1500-24 Folding Tail Block Repl. Pads
1500-33 1/4-20 x 1/2" Truss Head Screws (2)
1500-34 Lock Button Fasteners Only (2)
1500-35 Handle Bushing Set (4)
1500-36 Head Bushing Only
1500-37 Pin Clip & Cap Set (4)
1375-G Handle Grip Only
1499-M2 NEW Wide Metal Latch Set (2)
1500-A Pin Plate w/Screws (7)
1500-E** Saddle Casting & Fasteners (4)
1500-F Depth Bar w/Screws (2)
1500-P Spring Clip
1500-Q 2 Piece Transfer Tube
1500-S Pin Plate Pins (10)
1500-U DRIVING HEAD COMPLETE
1500-V* Wheels Set (2) & Screws (4)
1516-A Aluminum Tube Spring Clip
*To completely replace wheels (2), both 1500-21 and 1500-V are needed.
**1500-13 & 1500-E do not come with studs. Must be factory assembled on 1500-3. 1500-E comes w/fasteners for both new & old style stretchers.