Vinyl - Vinyl Other - Dollies

No. 280 H.D. Air Lifter

The Air Lifter moves heavy appliances up to 800 lbs. by generating high pressure jets through its perforated rubber load plates. Slide the air plates under the load, turn on the blower, adjust the convenient lift control valve, and the air plates inflate to lift the load. The plates glide over hard surfaces such as tile or hardwood without scratching. Comes with 4 smooth polypropylene pads which allow the plates to move over carpet. Saves time and reduces the risk of damaging new floors and injuries! The kit includes: 2 air plates, 2 horsepower blower with shoulder strap, lift control valve, T-connector, 3 hoses, 4 carpet pads, and protective carrying bag. Volts: 120VAC – Amps: 7.5. Net weight: 33 lbs.

No. 017 Metal Skat Skate Dolly Set

Crain Skat Skates are a pair of heavy-duty dollies that are adjustable in length for moving a wide variety of furniture and appliances. Each dolly in the set adjusts in length from 24″ to 32″. Each dolly has two 8″ x 10″ load pads and four pivoting casters beneath each pad. The 16 total casters allow the load to be easily moved or to change direction. The steel load bearing plates and telescoping tubes are welded together for durability. The soft urethane casters won’t scratch or dent most floors. The maximum load capacity for the set is 1,000 lbs. Set weight: 20 lbs.

No. 018 Tile Dolly

This dolly is specifically designed for moving heavy boxes of VCT and other tile around the jobsite. It rolls and turns with up to five boxes of VCT on its deck or approximately 300 lbs. of material. It has five swiveling casters including one in the middle to help it turn and rotate. The casters have hardened steel brackets and soft urethane rollers that tend not to scratch most floors. The rugged 11″ x 16″ reinforced plastic deck includes a handle for grabbing and pulling. Maximum capacity: 300 lbs. Net weight: 3 ³/₄ lbs.

No. 015 18″ Vinyl Dolly

These 18″ dollies are designed for moving and unrolling heavy rolls of vinyl on the jobsite up to 16″ in diameter. Each of the three 18″ long heavy gauge tubular steel rollers is mounted on double ball bearings to form a rolling bed for the material. Simply pull on the sheet, and the material feeds off the roll. The dolly has four non-marking rubber wheels mounted on the sturdy cast aluminum end frames which permit the dolly to be easily moved even when loaded. Net weight: 13 lbs.

No. 016 36″ Vinyl Dolly

These 36″ dollies are designed for moving and unrolling heavy rolls of vinyl on the jobsite up to 16″ in diameter. Each of the three 36″ long heavy gauge tubular steel rollers is mounted on double ball bearings to form a rolling bed for the material. Simply pull on the sheet, and the material feeds off the roll. The dolly has four non-marking rubber wheels mounted on the sturdy cast aluminum end frames which permit the dolly to be easily moved even when loaded. Net weight: 20 lbs.