No. 905 Heat Bond Iron

The ultra-low profile and narrow handle of this iron make it easier to bring the seam together near the back of the iron. Dual indicator lights show both power-on and heating status. Cord life is improved with the rotating cord assembly with flexible strain relief which extends the cord out of the seam area. The heavy-duty handle and riveted tray are highly durable. The back tip of the base is grooved to comb adhesive to the wall as the iron is angled out. This prevents “dragging-off” of adhesive which can cause failure. Non-stick coated base and 12′ long HSJO cord are standard. Approximate heat range is 220° – 425°F. Runs at 800 watts. Net weight: 3 1/3lbs.

No. 903 3″ Universal Iron Tray

This replacement iron tray holds Crain 3 inch irons and other popular 3 inch seaming irons. The spring clips are riveted to the tray for durability. Angled clip design facilitates “hands-free” re-insertion of the iron into the tray. Long-lasting all-steel construction. Net weight: 8 oz.

No. 906 Heat Bond Iron Kit

The No. 906 kit comes with a No. 905 Heat Bond Iron, a 25 foot 3 prong extension cord, plus a steel carrying case with enough space inside to hold the iron and a roll of seam tape. The case is made with durable, smooth-acting piano-type hinge, a plated steel handle and lockable hasp for security. Net weight: 151/2 lbs.

No. 898 Iron Combo Case Only

This all-steel case is designed especially for carrying carpet seaming irons. Inside there’s a movable platform inside that adapts to hold 3″ or 6″ irons, a partition for holding a roll of tape, and a separate space to loosely lay the iron’s cord and an extension cord. The case top is connected by a durable piano-style hinge for smooth opening and closing, and includes plated steel folding handle. Heavy-duty latch has lockable hasp. Take care of your iron with a Crain combo case. Net weight: 8 lbs.

No. 436 Straight Axle Roller

This roller has a solid axle with ten steel star rollers. The star wheels press the carpet’s backing into the hot melt adhesive. The steel bracket is welded onto the handle stem and plated. Rounded handle fits well in the palm of the hand, and is made of impact-resistant plastic for durability. Roller width: 4″. Net weight: 14 oz.

No. 438 6″ Pro Roller

The solid axle of the Pro Roller spans six inches wide and has 18 steel star wheel rollers. It ensures adequate pressure across the seam area even when used on wide 6″ tape. The steel axle and handle stem are welded and plated for durability. The hard plastic handle is rounded to fit well in the palm of the hand. Roller width: 6″. Net weight: 14 oz.

No. 435 Flex Axle Roller

The flex axle roller is made with two pivoting axles. Mounted on each axle are seven steel star rollers (14 total). As the roller is moved forward and backward, the axles pivot outwardly then inwardly. This action mixes the carpet fibers and pulls the seam edges closer together for less visible seams. The star wheels press the carpet’s backing into the hot melt adhesive. Roller area width is 4″ total. Net weight: 10 oz.

No. 437 Big Foot Roller

The bigfoot roller is made with three wide ribbed roller sections. The wide surface area on the ribbed surfaces prevents yarns from being snagged, protecting the yarns of delicate carpet fibers better than star wheels. The ribs also provide concentrated pressure to force the carpet’s backing into the hot melt adhesive. This is the best seam roller for fine denier saxony, plush, and velvet carpets. Roller width: 5 5/8“. Net weight: 15 oz.

No. 476 Carpet Tractor

The carpet tractor has three 2 ½” wide rows of star wheels mounted on a durable steel body with a wide, rounded top surface. The tool produces pressure on the seam to press the carpet’s backing into the adhesive. The three rows of star wheels mix the yarns of the carpet near the seam to reduce visibility. The body shape is optimal for applying hand pressure, and is finished with durable hammertone paint for good grip. Includes 36 total star wheels on three 2 ½” straight axles. Net weight: 2 lbs.

No. 187 Big Loop Napping Shears

Our big loop nap shears have offset handles with oversize loops for users with large fingers. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. The right side loop accommodates two fingers for ease of activation of the top blade. Handles are vinyl-coated for ease of grip. Net weight: 6 oz.

No. 190 Duckbill Napping Shears

Our duckbill nap shears have offset handles with smaller one inch loops for precision control. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. Handles are vinyl-coated for ease of grip. Net weight: 5 oz.

No. 496 8″ Carpet Shears

Our 8″ napping shears provide ultra-large loops and longer 3 inch blades. The angled handles easily position the blades for trimming off the tops of carpet tufts. Oversized loops accommodate large fingers. The larger right side loop accommodates multiple fingers for ease of activation of the top blade. Net weight: 6 oz.

No. 180 Seam Squeezers

These seam squeezers are made with a powerful torsion spring and two grippers that are oriented inwardly to pull seams together. Sold in a set of two. They are helpful on glue-down carpet installations to pull and hold seams together. Pulling force can be controlled with the amount of hand pressure. The spring arms are vinyl-coated for comfort. Nap grips are replaceable: Part No. 1180-A. Net weight: 3 lb./set